..:: Ironhead Sportster Cams ::..

 

New!!  XR-1000 the Original Factory "E" Cams back by popular demand!

 Available Now!  -  Get yours today $525.00  -  Call Now!!

These rare grinds have proven themselves by working very well in the past.

Cams are made of certified steel heat treated and finished ground.

Gear hone for proper cam gear fitment.  Original profile ground with more area under the curve.  For mechanical lifter only original HD XR 1000 generator style engine - two front head configuration and uses stock Harley valve lash specs.



6202 op cl valve lift TDC dur. Price
Intake 33 50 .436" .217" 263º $525
Exhaust 52 25 .544" .194" 257º  
Spring Kit 1

Double Spring Kit with Steel top collars and valve locks

 $124
Spring Kit 2

Double Spring Kit with Titanium top collars and valve locks

 $174
Note: These are street & highway Performance Cams improving both low and midrange power.  Adds an additional 700 RPM of  more usable power.  The Valve Spring Kit is strongly recommended for these High Performance Cams.


6205 op cl valve lift TDC dur. Price
Intake 33 55 .436" .220" 268º $525
Exhaust 52 25 .436" .194" 257º  
Spring Kit 1

Double Spring Kit with Steel top collars and valve locks

 $124
Spring Kit 2

Double Spring Kit with Titanium top collars and valve locks

 $174
Note: These cams are for the open road and drag racing and come on strong @ 4000 RPM's 6800-7100 RPM Spring kit also recommended for maximum power and longevity.


6208 op cl valve lift TDC dur. Price
Intake 30 55 .440"   265º $525
Exhaust 57 31 .480"   268º  
Spring Kit 1

Double Spring Kit with Steel top collars and valve locks

 $124
Spring Kit 2

Double Spring Kit with Titanium top collars and valve locks

 $174
Note: Big bore & stock stroke 1000 CC - likes to rev with good heads & spring kit 190seat & 540# open 8000 RPM These cams are some what easier to install in 1977 and later models because of the lower intake valve lift.


6215 op cl valve lift TDC dur. Price
Intake 33 56 .515"   269º $525
Exhaust 52 32 .515"   264º  
Spring Kit 1

Double Spring Kit with Steel top collars and valve locks

 $124
Spring Kit 2

Double Spring Kit with Titanium top collars and valve locks

 $174
Note: Street strokers or Big bore with stock stroke. Cams are nice on valve train & pulls hard to 7650 RPM. Must use spring kit and Light-weight retainers with hardened locks.  Extensive cylinder head modifications required.


6205 op cl valve lift TDC dur. Price
Intake 32 56 .480"   268º $525
Exhaust 57 31 .480"   268º  
Spring Kit 1

Double Spring Kit with Steel top collars and valve locks

 $124
Spring Kit 2

Double Spring Kit with Titanium top collars and valve locks

 $174
Note: 7200 limit

NOTE:  When ordering cam sets specify year to insure availability.  Cams other than those listed are considered custom.  Weld on Cam Lobes are also available for drag racing only.

VALVE SPRING KITS:  The above .495" Lift Kits do not require cylinder head machining for installation.  These kits are supplied with lower collars which allows additional spring travel as compared to the stock collar and provides these kits the ability to accept camshafts up to .49f" lift.

Have questions?  Need our help?  Please give us a call:  303-814-1709

© Lockwood Engineering - Black Widow Cams ® - All Rights Reserved

Site Design and Maintenance: TOWC